(→Setting up the first machine)
|Line 70:||Line 70:|
You should now see this screen. Our machine is ready and listening on the network.
You should now see this screen. Our machine is ready and listening on the network. now go to the other machine and boot it up with your copy of Clonezilla.
Revision as of 18:52, 11 December 2009
Clonezilla is a linux program and distribution that will allow you to clone a hard disk drive over a network connection. Their are two versions of Clonezilla: Sever Edition and Live. This is a guide to help you clone one system to another system using Clonezilla live. This method is called unicast. Clonezilla Server Edition supports multi-cast, which is cloning to muliple systems at one time.
To use Clonezilla you will need a copy of Clonezilla on a USB drive or CD. To download Clonezilla visit: http://clonezilla.org/. You will also need two computers with similar hardware specs. The computers need to attached in the same switched network environment.
Setting up the first machine
First you need to boot the machine that you are going to clone. Check your machines settings to learn how to boot from a USB or CD. The buttons are usually one of your Function keys at the top of the keyboard. Choose the Default Resolution. Then your should come to this screen:
For this step we need to collect information about your network. Find out what your networking addressing scheme by checking another computer or by contacting your network administrator. Find a range of IP adresses not being used. We will need two IP addresses: one for this computer and one for the computer we are applying the hard disk image too. For now though we just need the latter. You will also want to jot down the netmask, gateway, and dns for the following steps.
At this time we have an option to decide how we want to set up our partion table on our target machine. We are making an exact copy of our machine so we will just use the default setting to copy the partitiion table. Just press enter.
You should now see this screen. Our machine is ready and listening on the network. It is now save to remove your USB or CD of clonezilla. Now go to the other machine and boot it up with your copy of Clonezilla.
Setting up the second machine
Change to root by typing:
sudo su -
Set up networking for the second machine by typing in:
Now all you have to do is type in this command followed by the IP address the machine your are cloning to start the process. Type:
ocs-onthefly -s "IP ADDRESS" -t hda
Wait for the process to finish. Once it is finished you can remove the Clonezilla disks from both machines and reboot. You should now have an exact clone of your machine.